>> Project Engineering
We are able to engineer a full gas project for our customers, covering the designing, fabrication and delivery of the units, as well as creating a service plan for the generator.
>> After Sale Service
At PowerLink, we provide all our customers with a comprehensive aftersales service worldwide, allowing customers to have peace of mind when using our generators.
>> Accessories Support
PowerLink has parts warehouses in Europe, Asia, America, and Oceania, with a sufficient level of stock at each warehouse to provide customers with original parts when needed.
Service Applications
The provision of high-quality associated services is the main factor driving the long-term cooperation between PowerLink and our customers. PowerLink offers its customers a full package of services associated with repair and technical support of its own and third-party equipment.
High-quality and competent equipment installation, start-up and run-in is a ticket to its continuous failure-free operation. The commissioning package enables the customer to obtain a facility fully prepared for operation.
PowerLink carries out pilot operation of its new solutions at customer enterprises as part of joint projects.
Periodic equipment inspection and diagnostics as well as technical consultations with the customer, help prevent any problems or interruptions of power with our generators. PowerLink specialists can perform maintenance and repair at a time convenient for the customer regarding problems with their gas generators, or affiliate equipment.
At PowerLink, our available production potential allows our team to perform repairs of any complexity within the customer’s agreed timelines on their purchased generator. OEM parts, consumable materials, and their analogs are delivered from our central warehouse in Shanghai, China, but PowerLink offers spare parts and consumable materials for all products to customers all over the world.
PowerLink upgrades the previously supplied own- and third-party equipment at a customer’s site upon request. The aim of such upgrading is normally to aid in increasing the capacity of the existing system and improvement of the equipment control, which in turn simplifies the plant operator’s duties and signal transmission to the upper-level automatic control system.
Upon request, the customer may have its personnel properly trained by our team to ensure further adequate operation of the equipment supplied by PowerLink. This training programme can take place at both the customer’s site and in the PowerLink training centre.
1.8MW BIOGAS CHP SYSTEM ENGINEERING PROJECT
- Location: China
- Equipment: 3*CG600-BG Gas Genset
- Electric output mode: Low voltage to grid
- Field / fuel: Waste Centre / Waste Landfill Biogas
- Total output power: 1.8MW
400KW NATURAL GAS POWER GENERATION PROJECT
- Location: Russia
- Equipment: CG400-NG Natural Gas Genset
- Electric output mode: Low voltage to grid
- Field / fuel: Boiler House for residentials
- Total output power: 400KWe/460kWt
250KW BIOGAS POWER GENERATION PROJECT
- Location: United Kingdom
- Equipment: GXE250-BG
- Electric output mode: Low voltage to grid
- Field / fuel: Landfill Site / Biogas
- Total output power: 250KWe
250KW NATURAL GAS COGENERATION HOTEL PROJECT
- Location: Russia
- Equipment: CG250S-NG Natural Gas Genset Soundproof
- Electric output mode: Low voltage to grid
- Field / fuel: Hotel
- Total output power: 250KWe/330KWt
2MW BIOGAS POWER GENERATION PROJECT
- Location: China
- Equipment: 2x CG1000S-BG Gas Generator Container
- Electric output mode: Low voltage to grid
- Field / fuel: Livestock Manure / Biogas
- Total output power: 2MWel
75KW BIOGAS POWER GENERATION PROJECT
- Location: Brazil
- Equipment: 1xGXC75C-BG Biogas Genset
- Electric output mode: Low voltage to grid
- Field / fuel: Agricultural And Animal Husbandry / Biogas
- Total output power: 75KW
>> Project Engineering
We are able to engineer a full gas project for our customers, covering the designing, fabrication and delivery of the units, as well as creating a service plan for the generator.
>> After Sale Service
At PowerLink, we provide all our customers with a comprehensive aftersales service worldwide, allowing customers to have peace of mind when using our generators.
>> Accessories Support
PowerLink has parts warehouses in Europe, Asia, America, and Oceania, with a sufficient level of stock at each warehouse to provide customers with original parts when needed.
Service Applications
The provision of high-quality associated services is the main factor driving the long-term cooperation between PowerLink and our customers. PowerLink offers its customers a full package of services associated with repair and technical support of its own and third-party equipment.
High-quality and competent equipment installation, start-up and run-in is a ticket to its continuous failure-free operation. The commissioning package enables the customer to obtain a facility fully prepared for operation.
PowerLink carries out pilot operation of its new solutions at customer enterprises as part of joint projects.
Periodic equipment inspection and diagnostics as well as technical consultations with the customer, help prevent any problems or interruptions of power with our generators. PowerLink specialists can perform maintenance and repair at a time convenient for the customer regarding problems with their gas generators, or affiliate equipment.
At PowerLink, our available production potential allows our team to perform repairs of any complexity within the customer’s agreed timelines on their purchased generator. OEM parts, consumable materials, and their analogs are delivered from our central warehouse in Shanghai, China, but PowerLink offers spare parts and consumable materials for all products to customers all over the world.
PowerLink upgrades the previously supplied own- and third-party equipment at a customer’s site upon request. The aim of such upgrading is normally to aid in increasing the capacity of the existing system and improvement of the equipment control, which in turn simplifies the plant operator’s duties and signal transmission to the upper-level automatic control system.
Upon request, the customer may have its personnel properly trained by our team to ensure further adequate operation of the equipment supplied by PowerLink. This training programme can take place at both the customer’s site and in the PowerLink training centre.